|
I can help you guys out. My Compact 2k did the same thing after i did the trigger spring mod. I was able to shoot faster than my hopper could feed, so i got a revvy. That helped but once in a while it still chopped.
1. Make sure your ball detent is doing its job. not double feeding balls (mine was wore out)
2. Polishing your internals can help eliminate ball chop, not by itself but it helps.
3.Replace your o-rings on bolt and striker. (if they need to be, or just clean them well) otherwise after a ball chop you will have paint on the bolt, this causes a bad seal and gives you that burp.
4. Make sure you dont have any burs or sharp edges in you feed tubes or on the bolt itself. Any sharp edge can puncture a ball and cause an easy break in the chamber.
Hope it helps you guys out.
need any other help let me know. I have had a ton of problems with my good old compact, but havent retired it yet
|