MuddinPede_98C

Bad day for the Imp. Well, I just put in WAS, and was ready to lay some ropes down. It had other plans.

Well, I fill my tank and put the halo on, thew a quick line of balls to make sure everything was working, and it was. Well during the ten second countdown, I still had my doubts, it being new and all. So off the break I shot like almighty hell, then I get a chop, then about 2 more good shots I get about 15 chops in a row. I get to my bunker and squeegee, thinkin they were bustin in the barrel. I come out the right side and start layin it down. Out of 25 or so shots, 2 balls actually leave my barrel. So after that, I decided it wasn't gonna work.

After the game, I take the bolt out and clean everything. I shoot a few without the barrel, and had all chops. None of them were because of double feeding. I'm almost positive when I put in WAS, the hole you cut for the eye couldn't be any smoother. Sharpied the raw metal and everything. So I take my eye out to clean it, and after I do, it still isn't acting right. It would shoot whether it read something or not. I look at the board and there is no paint on it at all. Changed batteries, reset board, still no luck. As of right now it still is messed up.

I tried both eye modes, no luck. Tried turning dwell down, no luck.

Here's my setup if it helps:

...Nasty Impulse
WAS
CCM No-Rise
Halo B
White delrin bolt
Brass hammer
Ti pull pin
SS ramshaft
Tapeworm
Vert maxxy
SP non-vision ball detents
PE 68/4500

I'm just kinda pissed off I have a nice Imp, and had to use my Tippy all day.

Any help is very greatly appreciated.

__________________
Corey Nichols

Orange to Black Alias Timmy | Infamous Board | Dye Ultralight | CP Roller Trigger | Black Unimount | Halo B | Pure Energy 68/4500