Quote:
|
Originally Posted by joeyk803c
A lighter hammer requires a high flowing valve. That is why I added another valve to the list. Also a new board is probable, the Morlock board.
|
there are no boards available for the piranha. not one single spyder board will work. they are mounted under the grip panel, whereas a piranha is mounted above the trigger in front of the sear. (*unless someone came out with one in the last couple weeks)
as far as a lighter hammer, and needing a higher flow valve.....this combination does not work well with a piranha. believe me when i tell you that i have all these things, and a high flow pin too. it does not work, plain and simple. every aftermarket hammer i have tried to use in a piranha wont work because of a minute difference in where the sear catches it. most times it will just lock in place once you force it to cock. there may be one out there that will work, but i havnt found it yet and neither has any other piranha owner here or pbnation or a few other websites that i cant mention. it is recommended that you just use the original, it works best.
[/rant]
those are some nice ups
