Hey Tippy, Get outta here A-Hole, not only were you an A-Hole and trying to be "Smart" you were giving out Wrong info! ...
TES DOES have irregular fitting threads. I have a Torid X and all the fittings are standard because Odyssey made them standard. However, the TES does not have Standard Threads. You must change the entre ASA and Reg together. Good ASA is a Uni, good reg is a CP Reg/Sidewinder.. many choices.
If you have any other questions, don't be afraid to ask. If you encounter many Butts like Tippy, tell a mod to take care of him.
Also, when you plan to take off the ASA/Reg make sure you unscrew the drop from the gun first, (move the ASA forward, first) and then you can unscrew the reg, or else you will twist your Steel Line.
Quote:
|
Originally Posted by Tippy_A-5
OK NOW PAY ATTENEION!!!
1.)UNSCREW IT
2.)TAKE THE BRAIDED LINE OFF
OK NOW HERES THE HARD PART!!!
3.)PUT THE BRADED LINE ON TO THE NEW DROP
4.)SCREW IT BACK ON THE GUN
 THAT WAS HARD
JUST PLAYIN DUDE 
WE ALL ASK DUMB QUESTIONS
|
BTW Tippy.. You can screw off..
Good luck screwing the hose into the Drop.