|
quick tips for the FL
make sure u have plenty of gas or AIR (results in erractic shots if low on gas or air) have an expansion chamber and/or regulator, keep veolicity at 280-285 FPS for best results( rear veoclity ajuster makes ur life eazier when cronoing), i find a strip kit will work well to take apart FL quicly for feild striping (they have both in M98c and A5), if the ball chops simply open da feed, add water down the barrel, and squqgee out, cheapest paint to get any with this gun with good results is draxus scorch 10 bucks at wally world (AKA wall-mart, u pay for what u get, u were warned), best is marbz or pmi premiums. Really any medium bore paintball will do the trick.TEST UR GUN w/ FL BEFORE PLAYING to find best paint match for u and to make sure every thing working properly. OR U WILL REGET IT. ANd most importantly
READ INSTUCTIONS THAT COMES WIT GUN
also i tried a trick with using tefflon tape when attaching the barrel into the adpater but it genneraly results in more chopping, it better with stirp kit (this from personal experance, although tefflon tape dose work and makes easier ajust the barrel in battle ) hey try out, it up 2 u do whats best for u.
follow these tips and FL will preform like asked
|