|
the gun or the company doesnt have anything to do with a wire not being soldered right and it came off the microwitch (thats the flaps that your talking about right?). and they dont have to be certified for spyders so solder a wire...just need a soldering gun and some electrical solder...5 minute job
i change the switch on mine by myself...so i hade to melt the solder that was on the stock switch to disconnect the wirest from the board to the switch...i then got the new switch and some electrical solder and soldered the wires on the new switch...took me 10 minutes and it works great...anybody can do it
if your mom or dad or friend...whoever...had a soldering gun you could have fixed it on your own...just would have bought some electrical solder
|