|
$700, and so far I've dumped 12$s for an E-blade screw kit, which is all in all a good deal since I needed to replace some screws on the DC1 and I needed an extra frame screw for the '99 anyway. I also bought a pair of QEVs since it lacked them. I had a new bolt and shuttle made for it and a new bolt pin (the bolt pin that was originally used was a totally ridiculous design and I believe solid stainless steel pin, with a stainless steel sleeve to add the taper at the top which all in all was really heavy. I went with a completely titanium one piece pin now, anything less sturdy and I woulda worried about it since it needs to catch the hammer. I replaced the valve simply because the one in it seemed just plain worn somehow, the hammer could also use some love but its not a major issue and still works fine.
The Wiring required a little solder love which was fine. Everything but the reg cleaned up fairly nicely, but thats ok it now has a CP Shorty on it.
It shoots now, and pretty well actually, now that that is taken care of its off to be annodized in the next week or so.
so basically I had to dump an extra 100$ to get it working properly.
|