|
I'll try.
Take a small screw driver and adjust the RT speed adjuster (the one on the grip, not the one near the valve). Turn it Inwards until it gets snug. Gas up and pull the trigger a few times. It should become hard or impossible to pull after a few shots. This shows that the RT is installed right and not leaking.
Now take the screw driver again and adjust the speed adjuster ******ds a turn or so. Try the trigger. If you can shoot normally again, try to find the 'sweetspot' where the RT will keep the gun firing. You'll have to adjust the speed setting and get used to holding the trigger in the right spot, but you'll get it.
|