Quote:
|
Originally Posted by Cockerkid63
Is that what my guage should say? 220-250? And i dont know if my tank is hp or lp. I have a 48/3000 Pure energy tank (yeah i know i need a bigger one).
|
I have my pressure around 200 but it can go all the way to 275 and still be fine. It depends on the dwell and stuff. If you have a low dwell then you must raise your inline pressure, if you have a high dwell you must lower your inline pressure.
The solenoid vents itself at like 95-100psi. In the manual it tells you to screw in the LPR until the noid leaks like a *****, then back it off a half turn, that will be incredibly high and unneeded. 3/4 of a turn past cocking is fine.
Also if you have a lightened hammer you will need to either get a new lighter valve spring, raise the dwell or raise the LPR. Because if the pressure is too low to push the cupseal back it can be trouble and you won't have smooth shots.