|
check out the kamworld page linked in the ultimate sticky. it will describe most of this in refference to the stock boards. basicly there are a couple different causes for FSDO, the was board regulates the power differently and "eliminates FSDO".
Dwell is the durration that the hammer is told to hold the valve open (in milliseconds)
longer dwell allows for lower pressure operation but may lower efficiency.
shorter may get better efficiency but not be as consistent.
The best thing that you could do would be to write down what all your settings are now, so you can play with it and always have a "known working good" setting.
go check out the sticky, that page has some really cool stuff about your impulse.
|