|
I would start with the gasket, but do this first.
start with the gun aired up and the trigger frame on. back LPR all the way out so it doesn't cycle or leak at all. Start pulling the trigger as you increase the LPR pressure.
Does it start to cock the gun at all? If you get to the point where it cocks the gun every time and its not leaking you are fine. give it a 1/4 turn more and its done.
If it starts to leak, when does it? right when pressure first gets put on the noid? if its leaking where is it leaking? one of the holes up top? or around the gasket?
if its leaking around the gasket, replace the gasket. if its leaking around a barb, then you just need to add some sealant. If its leaking some where like a seam on the noid or another hole that shouldn't be, you may need another noid.
|