ADM

Thanks I am in search of a decent marker that will work on CO2 it is my only option, period. I am 60 to 70 miles from any one that can fill HPA or nitrogen and have 5 players of my own to have to get air for so getting a scuba tank wont fill my needs well if I spent a ton of money I could do it and then stil getting them filled without making emergency trips would not be possible. I tried lower pressure welding Nitrogen tanks had a charge station built problem is they usually start with about 2000 PSI give or take a little maybe a little more when its hot but you can only get a medium charge with a brand new tank so after a few fills you only get a light charge. I would love tyo buy a couple large welding type cylinders for 5000 PSI nitrogen tanks but they have to be shipped 4 hours from here to be filled wich means a huge expense to get started. Or have one of the paintball shops fill them for me but transporting them is liek traveling in traffic witha bomb in your truck. So the big question is there any good makers that work well on CO2 I have another post in air systems but havent heard anything promissing. I have been down this road for a few years so not to sound repetative or negative to answers like get HPA its not an option, only option is a marker that will perform well on CO2 and currently I have three tippmans with freak barrels special bolts expansion chambers two other basic stock Tippmans and they always work. But $400 to $600 later into each Tippman they still are just Tippmans. Any tips are greatly appreciated.