Not long ago I had purchased a 98 custom, however the stock trigger setup was totally different than what the schematics stated.... actually the setup was identical to the A-5. The sear spring is located towards the back of the sear and was used for pushing the sear to lock the bolt back instead of pulling on it like the old 98c triggers.
So for anyone attempting to modify their
newer 98c or
A-5* i've managed to make the gun fully automatic without purchasing any additional parts. (THANKS FOR THE INSPIRATION MORTISDEUM!!)
Instructions:
1.Pull out the specific trigger pin stated in the image.
2.Find a piece of "L" shaped metal to wedge between the slidder spring (within the slidder) that would reach the tip of the sear.
(computer casing alloys work great)
- Make sure that the piece is long enough to move the sear up as you pull back on the trigger
The problem, as you all know up to this time, is that the bolt cocks and uncocks way too quickly. 28bps quick
I haven't yet attempted to slow down the bolt to a resonable pace. Let me know if anyone succeeds in doing so. Thanks.