|
665 1/2. Not quite evil
Join Date: Jul 2006
Location: Lake Worth, FL
Posts: 300
|
Ultimate B2K FAQ continued...
B2K Uprades
Trigger Frames:
90* Trigger frame made by Acid Custom Paintball - www.AcidCustom.com- - Fully customizable. No two frames are alike. Custom trigger, grips, ano, milling.
- Standard design is a 90* frame but Acid Custom Paintball will make the frame anywhere from a 45* frame all the way to a Z-frame style.
- Magnetic trigger
-Bead blasted aluminum aloy grip panels with custom (your choice) design CNC milled into them.
-Trayless version frame also avilable.
-Standard style bottomline set-up
Zenitram 45* trigger frame - Out of production - -45* angle on trigger frame
-Black or silver anodized
-Magnetic trigger. Accepts Zenitram style trigger only
-Standard style bottomline set-up
Zenitram Z-Frame - Out of production - -Reverse 45* angle on trigger frame
-Based off of the AGD Z-Frame
-Black or silver anodized
-Magnetic trigger. Accepts Zenitram style trigger only
-Standard style bottomline set-up
OTB 90* frame - Out of production - -90* replica of Angel vert frames
-Angel style vert grips or OTB vert grips fit on this frame
-Three pivot points on trigger. Accepts OTB style triggers only
-Standard style bottomline set-up
Eaton Ripper Frame - Out of production - -45* angle trigger frame
-Designed around the Dye Sticky grips
-Single pivot setting. Adjustable spring tension. Accepts Eaton Ripper Frame trigger only.
-Standard style bottomline set-up
Powerlite Grip Stix Frame - Out of production - -50* angle trigger frame
-Built in mini rail/drop forward
-Single pivot point. Accepts Powerlite and stock B2K triggers
-Standard style bottomline set-up
Powerlite Grip Stix Frame - Out of production - -50* angle trigger frame
-Built in mini rail/drop forward
-Single pivot point. Accepts Powerlite and stock B2K triggers
-Standard style bottomline set-up
Blue Fork Design G1 Frame - Out of production - -45* trigger frame
-5 point trigger adjustability. Magnetic trigger. Accepts Blue Fork Design trigger only
-Made for the T2 trayless kit but can be used with the tray aplication
-Standard style bottomline set-up
Magnetic trigger mod
-Can be self done but www.BlueForkDesign.us and www.dementedproducts.us install the mod.
Microships and Circut Boards:
NoX Reloaded - www.BuyNoX.com- -Made by Rocky of Naughty Dogs
-Smallest size board available
-Tounry lock
- 7 firing modes:
Semi-auto, full auto, PSP 3-ball burst, NXL full auto, Millenium, linear ramp, training mode
-Adjustable dwell, debounce (electrical and mechanical), paint debounce, drop-off adjustment, ramp point, ramp level, rate-0of-fire, bypass rate-of-fire, Rate-of-fire fine.
Vaporworks Chaos 2K4 - www.paintballtrader.com- -Compatable with Vaporworks V-Link and software
-Tounry lock
- (stay tuned for updates)
Vaporworks Chaos 2K6 - www.paintballtrader.com- -Compatable with Vaporworks V-Link and software
-Tounry lock
-Similar size as NoX Reloaded
-9 fireing modes: Semi-auto, turbo, full-auto, autoresponce, NXL full-auto, PSP 3-ball burst, snap-shot trainer, off-the-break full-auto, off-the-break ramping
-Adjustable dwell, debounce, trigger settings, many eye modes
-Life-time warranty
Vaporworks Chaos 2K7 - www.paintballtrader.com- -Compatable with Vaporworks V-Link and software
-Tounry lock
-Similar size as NoX Reloaded
-9 fireing modes: Semi-auto, turbo, full-auto, autoresponce, NXL full-auto, PSP 3-ball burst, snap-shot trainer, off-the-break full-auto, off-the-break ramping
-Adjustable dwell, debounce, trigger settings, many eye modes
-Life-time warranty
Vaporworks Chaos Chip - www.paintballtrader.com- -Compatible with ICD 8200 board only
-Not compatible with LCD
-Semi only
Vaporworks Chaos Chip MAX - www.paintballtrader.com- -Compatible with ICD 8200 board only
-Compatible with LCD
-More firing modes then standard Chaos Chip
Low Pressure Regulators (LPRs):
Palmer Micro Rock - www.palmerspursuit.com- -Bets performing LPR around.
-70:1 output ratio
-Must have Autococker/Bushmaster/BKO/Promaster adapter to use
Macdev Sonic LPR - www.macdev.net- -Medium performance LPR. Better then stock, but not as great as the Micro Rock.
AKA SCMIII - www.akalmp.com/main.htm- -Medium performance LPR. Better then stock, but not as great as the Micro Rock.
-Has major problems with creeping
Vaporworks FMD Hoseless Micro Rock - www.paintballtrader.com- -Same as the original Micro Rock, just comes with a custom adapter built on.
Ported/polished stock LPR -
Valves:
Macdev Red Valve - www.macdev.net- -Extremely high-flow valve
-increases effeciency and lowers LPR pressure
Vaporworks Vapor Valve - www.paintballtrader.com- -Extremely high-flow valve
-increases effeciency and lowers LPR pressure
-Guranteed no-leak valve seal
eBay Valve - www.eBay.com- -Extremely high-flow valve
-increases effeciency and lowers LPR pressure
-Knock off of Vapor Valve
AKA Sonic Valve - www.akalmp.com- -Extremely high-flow valve
-increases effeciency and lowers LPR pressure
Empire Air-Assist Valve - Out of production - -Extremely high-flow valve
-increases effeciency and lowers LPR pressure
-Balanced valve allowes for extremely low LPR pressure
Verticle ASA Adapter:
Kapp Verticle ASA - Out of production
Shoctec Forward ASA - Out of production
Sonic ASA - Out of production
15* ASA Adapter:
Zenitram 15* ASA - Out of production
Bolts:
Vaporworks Vapor Bolt - www.paintballtrader.com- Litghter then stock bolt with o-rings to eliminate blowback
-detent slots
Shoctech Bolt - www.shocktechusa.com- -Hard delrin bolt
-shorter then stock
-detent slots
OTB Blind Bolt - Out of production - -shorter then stock
-Not-so-anti-chop-anti-chop bolt.
Acid Custom Bolt - www.acidcustom.com- -Shorter then stock bolt
-Detent slots
-O-rings for anti-blowback
Triggers:
Vaporworks s4 scythe trigger - www.paintballtrader.com- -Scythe trigger design
-Duel roller-bearings
Acid Custom Triggers - www.acidcustom.com- -Custom trigger for all frames
-Roller bearing or non roller bearing trigger
Pyro PB Custom Triggers - www.pyropb.com- -Custom trigger for all frames
Hammer/ram:
Acid Custom delrin ram/lightened hammer combo - www.acidcustom.com- -Lighter cycling weight for lower LPR pressure
Vaporworks Hammer - www.paintballtrader.com- -Ported and machined hammer for lower LPR pressure and less cycling mass
Custom lightened hammers - www.blueforkdesign.us, www.dementedproducts.us, www.pyropb.com
Demented 6061-T6 aluminum ram shaft - www.dementedproducts.us- -Less kick, lower cocking pressure, and retains strength and lubeign ability unlike delrin rams while still keeping weight down.
Acid delrin rams - www.acidcustom.com- -Less kick, lower cocking pressure
-Stainless steel thread insert
Pull Pin:
Demented Custom Pull Pins - www.dementedproducts- -Custom design for bling
-Made of aircraft aluminum for light weight and retaining strenght
-Decreased cycling mass
Blue Fork Deisgn pin - www.blueforkdesign.us- -Custom design for bling
-Made of titanium for light weight and retaining strenght
-Slightly decreased cycling mass
Shocktech pin - www.shocktechusa.com- -Custom design for bling
-Made of aircraft aluminum for light weight and retaining strenght
-Decreased cycling mass
Acid Custom Pins - www.acidcustom.com- -Custom design for bling
-Made of delrin with a steel core for light weight and retaining some strenght
-Decreased cycling mass
eBay Spike Pin - www.eBay.com- -Custom design for bling
-Made of delrin for less weight but sacrificing strenght
-Decreased cycling mass
PDS Install:
Pyro PB - www.pyropb.com
Vaporworks - www.paintballtrader.com
Demented Products - www.dementedproducts.us
Snatch Grips:
Demented Snatch Grip - www.dementedproducts.us
Trayless Kits:
T1 and T2 Trayless - Out of production
__________________
Mad Up'd Black/ Blue B2K4 PDS
1 of 1 Black/ Blue B2K4 PDS closed bolt pump
Crazy milled Silver B2K2 X-Mill
Mad Up'd 2000 Black/ Silver Autococker
My ICDO feedback. 24+/0-
Check out our site for a complete list of our services.
Quote:
|
And this product improved my performance the msot at one time then any other up on my gun.
|
Demented Products 6061-T6 ICDU Rammer Review. 9/10
Last edited by Demented : November 29th at 08:08 AM.
|