|
Ultimate B2K FAQ continued...
Autococker Detent Conversion
Demented Products - www.dementedproducts.us- -Single or duel drilling/tapping
-Eye cover milling on PDS model guns
-Ability to run Autococker detents.
Quote:
B2K Threads and O-ring sizes
Barrel Threads:
ICD/Bushmaster threads: 7/8” x 20 tpi (4-lead thread)
Autococker threads: 15/16” x 20 tpi
LPR Threads:
7/8” x 20 tpi (LPR to body)
3/4” x 32 tpi (LPR adjusting knob)
Ram Housing Threads:
7/8” x 20 tpi (Housing Body)
5/8” x 18 tpi (Ram Cap)
Ram Shaft Threads:
10-32
Feedneck Threads:
13/16” x 32 tpi
Low Pressure Air Passage Plug Threads:
8-32 x 1/4"
Bolt Set Screw Threads:
5/16 -24 x 1/2"
Tray to Body Screws (4 ea.) :
6-32 x 1" (Socket Head Cap)
Grip Frame to Tray Screws (2 ea.):
8-32 x 3/8" (button head)
Grip Panel to Grip Frame Screws (4 ea.):
6-32 x 1/4" (button head) (stock and most aftermarket frames)
8-32 x 1/4" (button head) (Zenitram 45 and OTB frame)
Trigger Set Screws (3 ea.) :
8-32 x 1/4" (set Screw)
Valve Lock Screw (1 ea.):
3/8-24 x 1/4"
Manifold to Body Screw (4 ea.):
4-40 x 3/8" (Socket Head Cap)
Solenoid to Manifold Screw (2 ea.) (old style manifold only):
1.6 mm screws (really small)
Eye Cover Screw (2 ea.):
6-32 x 5/8” (button Head)
New Style Detents w/o PDS (O-ring) Screw (1 ea.):
6-32 x 1/4" (button Head)
Battery Door and On/off Switch Screw (On tray, 2 ea.):
3-48 x 3/16”
Micro-Switch Replacement Screw (2 ea.):
2-56 x 3/4"
Bottomline Screw (2 ea.):
10-32 (lengths vary)
O-ring Sizes (Dash No.)
LPR:
Lpr adjsuter: 015
Piston: 015
Body: 019 and 016
Valve: 016
Ram:
Housing: (3)015 and 010
Shaft: 011 and 006
Asa: 012
Manifold: (2)006 and 015
2K3 HPR:
Upper part: 015 and 019
Piston: 011
Lower part: 010
Detent: 010
|
....
__________________
Mad Up'd Black/ Blue B2K4 PDS
1 of 1 Black/ Blue B2K4 PDS closed bolt pump
Crazy milled Silver B2K2 X-Mill
Mad Up'd 2000 Black/ Silver Autococker
My ICDO feedback. 24+/0-
Check out our site for a complete list of our services.
Quote:
|
And this product improved my performance the msot at one time then any other up on my gun.
|
Demented Products 6061-T6 ICDU Rammer Review. 9/10
Last edited by Demented : November 29th at 08:12 AM.
|