evolkers2003

Open the left side of the grips(guage side). Look inside on the circuit board(also called the PC board). On the stock 20bps board, you will have a little box with two switches labeled "1" and "2." The newer boards with 25bps and Full Modes will have the same box on the same side, but with 4 switches labeled 1-4. Following are the configurations needed to be set for the respected modes.

The top battery on the back is the universal power button. The lower one is the eye button which is used to turn the eyes on and off. Also if you dont use your fusion for 20 minutes the gun will turn off.

To turn the gun on, hold the power button down. TO turn it off do the same. To turn the eyes off hold down the eye button, do the same to turn them back on. The fusion always starts up with the eyes on.

Quick reference guide for your board:
Red light flashes every 3 seconds- Your battery is low, replace your battery.
Red light flashes every 5 seconds- standby mode, it kicks in automatically after about 30 seconds.
Blue light is a solid blue- Sensor system is on, and the marker has balls in it.
Blue light is blinking rapidly- Your eyes are off
Blue light is blinking slowly- The eyes are on and the marker dies not have any paint in it.

__________________

Sex on tv cant hurt unless you fall off.