|
ok figured it all out , the bottle was too low on pressure is what caused the fart noise , like it was running out of air wasnt enough to recock itserlf , then got a full bottle and tried it an whala it was working , yea , but it would only shoot abouit 2 to 6 times then power would go off , hhhmmmmmm, thought it was the eye , took the eye off , didnt fix it , took the eye wire off , didnt help it , but on the board when i unhooked the complete eye board and put the wires in the corresponding slots on the lcd board everything was good, went out tried the gun fired about 7 times and the power went off , after about an hour of pulling the trigger ressetting and pulling the trigger etc., pull the board out of the handle and it always clicked when i pulled the trigger , put it back in and about 5 or 6 timesor if i held the gun sideways it was fine, hold it right and it would go off , finally figured it out , the metal around the lcd was touching the gun frame and shorting off , put some tape on it and it was fine , but the battery was showing low but i thought the eye board being removed it just wasnt reading rite , wrong it was rite , because my gun was doing the same reading every pull , the counter was counting but no click with air and the gun cocked , didnt have enough power to pull the sear to fire the gun but uncock it and it would click , put a new battery in it and tested it and finally the gun works and very fast i must say , the guy a few post ago about the jumper thing just unhook the eye board , really easy , put a new battery in and you shoud be set , mine would get hot also like yours but it was shorting out with the frame thats all , .......hope this helps someone ....scott swanner oh and ps the gun is a spyder elite with 14" terminator barrel , java lpr , with detonator reg., and the dragun tes trigger and shockteck delrin bolt and halo tsa hopper
|