|
well i polished the sear and tested with the stock spring to make sure it was safe to use durring a game then i started to modify spring to fit the gun i bought several lengths/strengths of extension springs
i cant go any softer as the sear still needs enough pressure to hold the sear up i tried several springs in hope of a super light electro trigger pull but i was having problem with the sear catching with the first 2 springs i cut a new one out of a tidbit stiffer spring now the sear catches reliably
I also swapped out the stock compression spring for a much lighter/shorter spring just enough to get the trigger to return to rest rather quickly pull is down drastically ill see about testing trigger pull tomorrow
also after removing the safety which was a task in a half i realized that the front of the trigger would be pushed up with a set screw instead of down which i want ill have to fully modify the trigger setup with the trigger return spring behind the trigger instead of in front if i want a pre-travel screw
|