|
Don't try the finger trick. (those of us with the LVL 10 know trick) Because as it stands your bolt is a venturi version of the LVL 7 bolt.
As for the spacers they were an attempt to eliminate bolt stick by using different sized spacers. It is similar to the shims in the LVL 10 bolt kit but not the same.
The black Foamies are not for your bolt and are meant for the stock bolt (Not the venom one).
Here are a few thing you can do to try stop the blender effect.
1. Put the stock bolt and spring in the gun with a fresh foamy glued in place. This alone will might solve the problem.
As for the 2 brass pieces in the 2nd to last pict they are parts of the ON/OFF valve that is between the reg and the power tube.
I can also recommend a good shop in the Riverside area that is realy good with automags (and still sells them)
If your in the Socal area and can make it out to SC Village I can take a look at the gun and see if I can do any thing for ya.
__________________
Tippmann Owner, Smartparts Owner, Spyder Owner, Autococker Owner, Pump Owner, Seridan owner, Automag owner... Gun Collector 
Homebrew Mod God Tippmann Mods:
Spring Loaded RT, Mirror Polished Internals , High Flow Valve, Full auto Mod
Smartpart Mods:
Ion Foamie
Scenario Gear:
Co-Axis Law Launcher, Foam Rockets, Mini Tanks, Paint Mines
If you make your own custom parts put this in your sig.
|