|
wow, it kinda sounds like the previous owner did not take care of it at all. first of all if it is not super heavily modded id reset the timing to factory fast, its not going to be the best setting but it should make sure it works for now. secondly your going to need a HPR that is adjustable so if the one you have is not working you need to get it fixed/replaced. if the asa is functioning as an asa then dont worry that the on/off isnt working right now, get it replaced but for testing and tinkering as long as it gets air into the marker it will work (look into the CP mini if you dont want to spend a lot, and the Bob Long gear driver if you want to spend a bit more on a on/off ASA)
you didnt mention what hopper you have on top so its kinda hard to say where the chopping problem is coming from, it is a bit of a long shot but it could also be a problem with your LPR just putting too much pressure on the ball.
so you need to get the regs in good working order first, if you need to order parts i HIGHLY suggest while getting parts you also purchase an o-ring kit and overhawl the marker (replace every single o-ring reguardless of how good it looks) these kits are gennerally $5 and it is always a good idea to have extra o-rings
__________________
Quote:
Originally Posted by Crawdaddy
I'm not going to lie if I were rich and famous I'd be running people over with my car all the damn time.
|
blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off
|