did you mean the dye website? i just pulled up the proto 6 manual and realized its horrable, they dont even give you sizes for all the o-rings on the bolt
at any rate here is a link to the dm6 manual, both markers use the same bolt so o ring sizes that the dye manual actually has should be good for the PM6 (except for the one that is the wrong size)
http://www.dyematrix.com/manuals/DM6_Manual.pdf
now if your looking at the dye manual look at the o-ring labeled #2 on the bolt, if you look at the size on that it is a #15 o ring, but also look at o ring #9 right next to it, that one is also said to be size 15 and yet they are on two different sized places on the bolt, the o-ring #2 on the bolt is supposed to be size 17 instead, so see what size you used and change it out for a #17 and see what happens
__________________
Quote:
Originally Posted by Crawdaddy
I'm not going to lie if I were rich and famous I'd be running people over with my car all the damn time.
|
blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off