|
I'll help you guys with the loctite off topic stuff ,but first to answer the original question. First we start by setting up the input pressure. Turn your main reg pressure way down. Next, Turn your IVG so that you see only two threads. Now turn your main reg. up 1/4 turn at a time and check velocity. When you reach 280fps your done seting your input pressure. Now if you LPR is still leaking after this, You will need to take it apart and clean it. Now for the Teftape or loctite. You should never use teftape on any area that leads to the main reg. or lpr. when you tighten the parts down ,threads of the tape can get loose and enter the regs causeing them to be inconsistent or even vent. " been there done that,lol" Blue loctite is not only the best way to go ,but if your time is worth anything to you ,its also cheaper. Hope this helps all involved here-VLLAD
|