TimmySand

I have and Icon e and It only fires every other time I pull the trigger. I just put a new battery in it and the batteries charge is 9.4-9.5 volts. I used to have this problem when my battery was low when playing. What should I do?

HuNtS

it may possibly have the same problems the spyders do.. try tightening the trigger frame and let us know what happens.

__________________

TimmySand

wow that was a fast response, ill go try it

TimmySand

Nope, it didnt work

HuNtS

put a little oil on your hammer and sear and see if that helps

__________________

TimmySand

that shouldnt be the problem because i considering I just got done polishing them

TimmySand

I finally solved the problem by take 1 coil off the spring that sits underneath the sear

HuNtS

wow, that's weird, i've never heard of the sear spring being too tight... is the gun new? or is it older?

__________________

TimmySand

actually that wasnt the problem. A little while after i did that i couldn't even get the hammer into the body by pushing the solenoid with my finger. I found out that the solenoid was too far back in the frame, which kept it from pushing the sear all the way down. so i just took it out, put it further forward and tightened it. problem solved.

HuNtS

wow, way to go! that's kind of neat that you figured something like that out.. i never would've thought of it..

__________________