Paintball4life5

Does anyone know what is wrong with my gun when i put my velocity knob in it wont shoot it just keeps making little click noises. Please help me if you know anything wrong with it, thank you.

Mooseman1710

uhh have u cocked it?

__________________

inkjt510

DO you have c02 left?

__________________
The Professor Is In The House

Live in PA? Looking for a team? PM ME OR POST HERE

PBFireguy

Check the battery?

__________________
Godspeed Motorcycle Club

www.godspeedllc.com

Greater love has no man than this, that he lay down his life for a friend. John 15:13

Impy28190

had same problem with my old spyder, charge your battery, make sure you have co2 left, and that it is cocked

Paintball4life5

Yes i did check to pull the cocker back but after that i try to shoot it and it seems jammed, yes i do have air. Do i have to charge the gun in the back of the handel?

PBFireguy

If you have a rechargeable batteryt in there, yes. Mine did not come with one, had to buy seperately.

__________________
Godspeed Motorcycle Club

www.godspeedllc.com

Greater love has no man than this, that he lay down his life for a friend. John 15:13

Master of Paint

Are you using a standard 9 volt battery? Nine volts isnt enough in most cases to power the sear to release the hammer.

What you need to get is a 9.6 volt. Java makes rechargeable ones as does 32 degrees. Since you have the Icon E, you probably have this battery, but I figured I'd throw it out just in case.

__________________
_Clark


Only real men know how to count to eight: 18436572
Make your own Hoff Plane!

wetsnot

regular 9V battery is enough. no need for 9.6V on the icon e

__________________
2K3 VF A/C, 48/3000, Reloader, Freak
Icon E, ergo reg, turbo valve, thunder pig
Automag 68 Classic, SP Teardrop
Piranha VTL Eforce, 15* assault block, ergo reg, pmi razzor

Looking to buy on the Buy/Sell/Trade?
Got scammed? Check my tips for safer transactions.

blackstarxxx

make sure the trigger frame is screwed in all the way. if it isn't close enough to the body then it will jsut click. it happened with my icon a couple times. i screwed in the back screw on the trigger frame thne it worked.

__________________
owner #420 (woot!) :::
vsc-45 phantom

Magnumclip

I Have A Icon I Had The Same Problem Its Just The Battery

monkeyman

I had this problem and the solution isnt very obvious

It has happened on 2 e-frames that i have had.

The trigger selonide has proberable come loose or shifted.

Take the trigger frame off and open it up. Stick a screwdriver to the 1 side of the selonide and make sure its pushed completly to the 1 side. Then make sure the worm screw is in tight which is located at the top of the frame pointing down onto the selonoid, using some threadlock is a good idea.

If that doesnt work then its likely to be the battery, in both of my e-frames only duracel ultra will cut it. cheaper batterys wouldnt work

You might also have problems with recharganle batterys as they tend to be a bit weak.

If you still have a problem putting a bit of oil on the sear can also help.

mr-happy

Your problem can be several things.
1. Trigger frame not screwed in all the way
2. Low battery
3. Sear problems (Take to pro-shop)
4. Put bolt, etc. in wrong way.



Hope this helps

__________________
"It's not the gun, its the player. Well, unless you use rentals."

Dragun T.E.S.
Halo B
OGI Clamping Feed
Magnetic trigger
25 gram switch
JAM Bolt
68/3000 PMI