Thread Tools

**Paintballer 74** · December 5th, 02:11 PM

Well one of my close friends own's a Silver Bullet Lcd and he's had this problem since the day hes bought it which was in March...

The prob- When he pulls the trigger it will fire sometimes but the other times it doesnt do anything, and sometimes if he lucks out he can get it to fire by kinda puting his finger and wiggling the bolt and it will fire. Sometiems it fires and sometimes it doesnt. I can't think of anything to help him. When we put a new energizer battery in it will fire about 20 rounds or so I guess then it will happen again. Ive greased everything from the striker to the bolt to the chamber with dow 33 so i'm out of idea's.

Please help!!!

Thanks

**HuNtS** · December 5th, 02:29 PM

does it fire then click a bunch of times, then fire once or mayby twice then clicks again??? if so, the trigger frame is loosening off the body, tighten the screws, that happens all the time on my friends imagine and electra-dx

**Paintballer 74** · December 5th, 04:33 PM

If you mean if he pulls the trigger a couple of times and it sometimes fires once or twice then thats exactly whats wrong! Thanks alot Hunts!

Alex

**Twistedpain** · December 5th, 04:36 PM

It sounds to me like a short or a wiring probelm go through and check all the wires.

**Paintballer 74** · December 5th, 06:31 PM

Alright I'll be sure to do that...Thanks

Alex

**chris37** · December 5th, 06:59 PM

you kno wwhat, i had this same problem with my e-99 avant, all you have to do is tighten the trigger frame closer to the body of the gun, hte problem with mine is that it was loose! my frame was slipping off of my gun and i needed to tighen up the bolts, because when the trigger was shot and the thing inside the gun that makes the bolt fly back wasnt touching till i pushed the frame up to the gun closer! try that and see if it works, tighen the frame closer to the gun

**Paintballer 74** · December 5th, 08:54 PM

Should he actually move the trigger frame forward on his gun or just tighten the screws up on it?

**chris37** · December 5th, 09:18 PM

nah, just make sure its in place and tighen all the screws for it
i had to tigten my screws everytime before i play! on my e-99 atleast lol and my feedneck came unscrewed after a game too! iwas like, damn spyder! lol but its all good now, so just tighten all the screws on teh gun all of them and make sure they are all nice and snug so that they dont come loose for a while, and tighten them before each game of play!

that should help yah!

**spyshark** · December 9th, 04:11 PM

You should not have to tighten the screws all the time just go get some blue loctite and clean all the screws with alcohol.Then use some Qtip swabs with alcohol and clean the holes and let them dry.Put a drop of loctite on each screw and you will never have a srcew come loose again.I don't know if that will cure the prob with the siver bullet but it will help evryone who is having the loose screw prob.

***MedicDVG*** · December 9th, 05:09 PM

Also check to see if you have dirt in the microswitch. Sounds like you have an intermittant contact problem.

twik · April 5th, 12:21 AM

Try fixorama.

Thread Tools

View more Paintball photos