|
Screw the quick disconnect to your ASA on yourgun (the thing that the tank screws into) Unscrew the knob on the tank end of the remote all the way and then screw the tank onto the remote and then attach the other end to the quick disconnect on the gun. Then turn the knob on the remote all the way in. That will open the tank and send CO2 to the gun. Taking it off is a different story. First unscrew the knob all the way out to shut off the Co2 and then fire the gun until it makes that farting sound. Then use the quick disconnect. NEVER remove the quick disconnect with the line pressurized (always shoot it till it farts) after you turn the air off because it willsooner or later blow the o-ring out of the quick disconnect and your remote will be un-usable. And that O ring is a smaller harder to find size. So I hope this helps. Enjoy your remote!
__________________
Rate my Gun
Smitty's Feedback 5+/0-
I DONT SHIP FIRST~~Unless you have good PaintBallForum.com feedback.
I could give 2 sh*ts about any feedback from the nation
or somerandom13memberPBforum.com
|