|
You dont have to change anything in the timing. Because as I said, all that happens when you pull the trigger is the sear solenoid engages. All you are changing is how far the trigger moves before and after it reaches that point. It has nothing to do with the actual engaging of the solenoid, so you don't have to retime anything.
Bounce is when you fire more than once for a single trigger pull. It can be caused by something as simple as the recoil of the marker causing the trigger to be pulled ever so slightly again and refiring the marker. That's why you have filter settings (TPUL and TREL) on your eblade. TPUL is the time required for the trigger to be pulled for the pull to be accepted as a real pull. The TREL is the time the trigger has to be released before the marker will fire again. Obviously, by upping these values, you make it so that recoil will not be able to refire the marker, because the trigger would be moving too fast.
And whether bounce is good or bad depends on a few things. If you're playing rec a little bounce is fine. In tournaments, however, bounce means the end of your tourney life.
I find it's best to adjust your settings until you eliminate bounce altogether. That way you know that is was YOU who eliminated your opponent, and not the gun firing faster than it should.
__________________
PM me with any questions you might have and I'll do my best to answer them.
2k4 Trix
------------
Evolve Kit
CCM No-Rise
Tadao 5.0 M3
|