12345678910
RESERVED For KidPaintballs Final work!
Ok, I'm goona fix everything up and make it better now.
Stock Bolt Mod., or poor mans lightining bolt mod!
Link to Otters SC Customs Site on how to do this!
This process is
very simple. It involves taking the sart shaped item out of you stock Spyder bolt.
How to do this?
1)You'll need some medium sized needle nosed pliers. They need to be skinny enough to fix in the front of the bolt, but strong enough to rip that bad boy out
2)Place the needle nose pilers in the front of the bolt.
3)Twist the pliers counter Clock wise while looking at the bolt
It should then unscrew.
If it does not, heat it up with a zippo lighter or something, there might be loctite in it.
=====================
Polishing Internals
Here is a link to Otters SC Customs Web site page on how to do this.
I have not yet done this, so I suggest that you read up on how to do that at the web site. He explanes it very well and I am going to do it as soon as I can. After that time I will then tell you how it went and any other pointers and tricks to do this!
=====================
Magnetic Trigger Job!
This one is a bit trickey so,
here is a link to do this at Otters web site!
Its basicly putting one magnet on the top, and one on the trigger so they repell. I'm plaing on trying this as well, so I'll be sure to let you guys be the first to know how it goes!
+++++++++++++++++++++
"How To Achieve Turbo"
This tells you how to switch some wires and achieve "turbo" Its is like the responsive one Tippmanns.
[/quote]
Thanks alot Ahmadi6490!
'Noid Mod
That is the link ot "quite" your e marker 'noid. Writtem by our own Ahmadi6490