View Single Post

Old June 27th, 10:39 PM   #11 (permalink)
bunkertime
I'm.... BACK!
 
bunkertime's Avatar
 
Join Date: Feb 2003
Location: Jacksonville, FL
Posts: 3,794
The manual says don't go over 200 cause the micro guages the pball industry used are Required to be within 20% of accurecy. which means the guage might read 200 when it realy is 220. And... the noid that the Impulse ususes has a maximum operatingpressure of 210 PSI, and will cause major damage of ne pressure over 220 PSI.

I highly doubt you can run a sTock Impulse at 120 PSI w/ 12 beeps of Dwell. I call major shenanigans on that smelly pile dood. also.. your avatar scares me

A good pressure to run a stock impy at (like paintbug said) 190 PSI then Set the dwell all the way down, crank it up until you get full shots, then chrono w/ the Dwell.



And please, Don't go w/ Evil parts, they are possibly the worst parts to put on ur gun, Stick to Ndzs. also might wana try out the WAS board by wicked air sportz and the Blind bolt by OTB.

--Kan Man
Gun Tech
__________________
she's a virgin if u don't count anal
Quote:
Originally Posted by D_Smalls
they were pretty big, but i was pretty drunk..


•••

BT Football - #65
bunkertime is offline View My Blog!   Reply With Quote