|
well i have picked up a RM with ALL the trimmings, almost more then i had on my first one, for $300. If you were going to start with a stock one and build it up it might cost a bit more. One of the first things i recomend are new regs and Madmarty mods. A RM is a little bit of a gas hog so you will need a reg with good flow, and an adjustable LPR is definitly needed (price depends on regs). MM mods will cost you about $50. Then from there you usually get a delrin bolt ($20), macmount ($20) (so you can clean up the front end and have a place for that new reg) and a tornado valve ($50) if you can find one. Don't get a madman rocket valve. If you plan on getting a grip frame from another gun and using an adapter, get the adapter that is also a macmount. After all that you will have great potential to perform, but will still be limited by a capped stock board at 9 bps. So a TALOC chip ($30??) is definitly the best bet. But if you are a big spender then the Thunder board is the best ($120)
|