|
If you unlock all the fireing modes you get "multi" with is the same as burst...
Put 2-3 drops of oil on each oring of your bolt. Use PB gun oil, alot of other oils will swell orings and in most cases thats a bad thing...
Also remove your stock SS hose from the regulator, and drop about 5 drops of oil into the bottem of the regulator. Our stock regs DO NOT come lubbed from the factory, and it will be tons more consistant if you lube it up before you play. When you do this, turn the pressure all the way down before you apply air to it again...If you have it set at 300psi before lube, it could jump drasticly after its lubbed up and working good...Most TES's run in the range of 200-300psi, so don't get excited with your pressure...Also the stock gauge is very inaccurate, so don't trust it...chono your gun before you decide to shoot anyone with it...
And I would reach out and slap anyone who said paintball guns shouldn't require any oil...definatly fire him from a position where he gets to work on guns...ooch...
__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.
Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.
Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.
|