just yesterday i decided that i didnt like my old talon ghost and even though i will probably never use it again, i decided to customize it by giving it a shorter trigger pull, a lighter trigger pull, a shorter pump, and a lighter pump...its pretty pimped out now...i used a rubber band to replace the hard metal spring on the trigger pull and its awsome. the pump was tricky, i first made a nwe spring out of the wire on spiral notebooks, this turned out to be a great spring the pump was really easy and everything still worked properly, but then i decided to make the pump shorter because i noticed that there was a large space in the gun that was unnessesary so i found a pen cap and sawed off the end of it so i had a sort of hollow cylinder shape with open ends, it fit perfectly on the rail that everything sat on inside so the long pump problem was solved...now i only have to pump this gun 1 cm instead of 1.5 inches...and the trigger pull was much better, if you have ever used a talon ghost you would know how hard the trigger is...in the end i found it alot quieter in pumping(not as much clicky sounds) but i think i will try to make it more scilent with foam or sumthing...i am going to paint my hopper and the black pump on the barrel to be green camo flames then on either the handle or the back it will say "Talon 98 Custom"...
__________________
My Setup:
Green Spyder Imagine-32* Whisper 14" barrell-Kingman ACS cocking bolt
32* 200rnd black hopper
JT Facemask
12 oz Chromolly Co2 tank
Backup: talon ghost-shortend and lightend trigger pull, lightend pump
Talon Ghost...20 dollars
JT Facemask...18 dollars
Dusk Paintballs 200 rnd...6 dollars
Watching your friend twitch on the ground cus you shot him in the balls...pricless
Pump Owner #11
