Thread Tools

**ToridXFast** · February 24th, 07:17 AM

I can put any valve in this i want like the lvl 10 right or is the x valve better and how much do they run?

**MrMacDude** · February 24th, 01:20 PM

the x-valve is a valve.
The level 10 is a bolt.

The x-valve comes with a level 10.

lx - 50
X-valve 225

Alpha · February 24th, 02:08 PM

AGD has a tradein program where you trade in your classic valve and they will give you a discount on an X-valve. Its only 175 with the tradein program.

**jacobeid** · February 24th, 04:30 PM

Quote:

Originally Posted by Alpha

AGD has a tradein program where you trade in your classic valve and they will give you a discount on an X-valve. Its only 175 with the tradein program.

The last time I checked they only gave you $100 credit and its $325 so it would be $225. but lemme check.

Edit: straight from AGD's website
"The $225 price is part of our GO X-VALVE! program and requires you to trade in your original complete valve. We will email you after receiving your order with instructions on where to send your valve. Do not send your valve to us until you receive full instructions from us! Once we have your valve we will send out your new X-Valve. If you wish to buy the X-Valve without turning in your old valve, the price is $325. We cannot give additional discounts if you trade in your existing stainless Retro Valve or for Lvl 10 equipped valves - we can only credit you $100."
At that point its really worth just looking into a used RT pro for that kind of money.

**ToridXFast** · February 24th, 04:48 PM

ok so how can i make it rip without chops and without buying an x valve how about a ULE trigger pull kit and a lvl 10 bolt will it all work on this gun?
sorry for sounding dumb but ive never had a mag before guys!!

**ToridXFast** · February 24th, 05:12 PM

would that work on this gun^^^^^^^^^

**jacobeid** · February 24th, 05:17 PM

Level 10 will work on that gun, but ULT (ULE trigger pull kit) only works on x-valves or some kind of rebuilt valve.

"Drop-In retrofit for X-Valves, Emag Valves or Modified Retro-Valves. NOT suitable for use with Automag/Classic/Minimag Valves."

So no, ULT would not work on that gun, but LX (level 10) would.

**ToridXFast** · February 24th, 05:23 PM

how can i make it faster then

**AGD_kid** · February 24th, 05:27 PM

get an RT(e-mag, micro rt/e-mag valves, x-valves) valve. that and a lvl10 will make it faster than you know what to do with.

**ToridXFast** · February 24th, 05:31 PM

how much to rt valves run? and do they work the same as an rt valve on a A-5

Alpha · February 24th, 05:39 PM

no RT on a tippmann is COMPLETELY different form the RT on a mag.

Mag RT stands for Reavtice trigger. The trigger bounces back at you when you pull it. Its 100% legal. Tippmann RT is touerney illegal

**ToridXFast** · February 24th, 05:50 PM

hmm ok and that will work on my mag is it just a valve that you have to get? and if i get the rt valve and a lvl10 will the ule trigger kit work on it then? price range?? and how fast will it rip after i do all this to it or any toher sggestions, and i dont have enought money for a x valve

**txaggie08** · February 24th, 06:26 PM

ok, the x-valve(also known as the rt valve) is the complete rear section of the gun. youll take the reg, bolt everything out and be left with just the shell. then youll install the xvalve in its place.

I know alpha got his up around 17 a while back, and i now guys with the pneumatic trigger conversion are ripping 15-16 stable off. if you want it going much faster, youl have to pick up a devilmag or hyperframe, or build an electro conversion yourself

**txaggie08** · February 24th, 06:27 PM

xvalves can be had used for around 180 and new for 2something

**ToridXFast** · February 24th, 06:43 PM

so is a used one just as reliable and good as a brand new one? Isnt ther diffreent valves like a rt valve and x valve and others i dunno i thought i sall some, im new to mags, sorry guys

**AGD_kid** · February 24th, 08:16 PM

i see some run low as 120, but every one is fine, just test it out, and if there is a problem, an parts-kit can fix it. if not, you have us.

**ToridXFast** · February 24th, 08:18 PM

isnt there a rt vlave and an x valve and other ones that are differnet?? i dunno^^^^^^^^^^^^^^

**ToridXFast** · February 24th, 08:19 PM

oh another question sorry but what are the tunning you have to do to mags to get them running right? i always read about how a well tuned mag will never chop and will run smooth?

**thecolinator** · February 24th, 08:26 PM

You should probably check the stickies at the top for tips on tuning your Level 10. As for which valve to get, I say the X-Valve. I haven't heard much about the other valves, but I do know that the X-Valve has no shootdown at 26bps, and that's pretty amazing.

**ToridXFast** · February 24th, 08:28 PM

ok cool but will that work with the ule trigger kit the x valve?