Thread Tools

***jnjnfl*** · April 3rd, 08:54 PM

Well, after some research, I am very very impressed by the mags. Its exactly what I was looking for, a mech with a lil speed to match the great looks. So far , from the AGD website this is what I have.

Select an X-Valve : Black
Select a Mainbody : ULE CF Blue
Select a Gripframe : Intelliframe Double Trigger Brite Black
Select a Barrel : No Barrel
Trigger/Valve/On/Off Type : ULE Trigger Pull Kit/Installed

Now, I realize I still need a barrel, hopper, air source, drop forward, but , what else do I need for this beast? A reg? Some macroline parts?

I plan on using my Crossfire 68/3k on this gun. Its preset for high pressure, which I understand the mags love. Anything to add? Suggestions? Thanks in advance.

**bobide** · April 3rd, 08:56 PM

no reg needed. Don't u need the level X bolt? Or does that come w/ one of the things....

***jnjnfl*** · April 3rd, 08:59 PM

I believe, from the AGD website, it comes with a level 10 preinstalled, and the trigger kit preinstalled

Alpha · April 3rd, 09:14 PM

X-valves come stock with the Level 10 bolt on it.

However, save yourself a lot of grief and talk to RogueFactor on AIM. Visit his website at www.themagsmith.com. He can save you a ton of money. He's an independent AGD dealer.

Mags dont need regs. They already have a reg built in.

I'd reccomend against a dropforward. Takes away a bit of accuraccy beucase you can't shoulder it and sight down the barrel normally. Also makes your gun taller.

You might run into isues here you run out of air when tuning your LX with that 3k tank.

***RogueFactor*** · April 3rd, 11:35 PM

E-mail me at RogueFactor@earthlink.net when youve decided exactly on what you want.

I will get you hooked up with a great price and a great looking marker.

Alpha · April 3rd, 11:38 PM

Ahh, see? Rogues the man, once you get your mag, you'll find that his aftermarket parts get more and more inviting. I'm even thinking about getting an RPG body, right after I dropped 150 on a new frame.

<3 for rogue

**Pezzer** · April 4th, 03:20 AM

Got to admit: Rouge's stuff is WAY nicer looking than stock AGD, and a better price to boot!

I can't wait till the custom shop opens...

-Pezzer

**jacobeid** · April 4th, 06:33 AM

Go with rogue...with everything. His prices and products are better.

***jnjnfl*** · April 4th, 02:53 PM

Rogue, what a guy, Thanks. Im not ready just yet, but Ill definately bookmark your site, and shoot you an e-mail once I get the $$$ together. Looking in the neighborhood of 1 month or so. Assuming the marker runs around 500 or so. So far wht I had was a vertical feed body, black x valve, black double trigger, with some sort of ULE Trigger Pull Kit/Installed (I am assuming this lightens the trigger pull.). Nothing super fancy, its whats on the inside, lol. <----Which is part of the appeal to me.

**Emrys_250** · April 4th, 05:56 PM

Be sure to look at the paradigm. They are hot! Only $450 for one with a ult.

**Meekajahama** · April 4th, 06:18 PM

ya well I think im selling my cocker for 200 so ill definately get a chimera frame so looking forward to ordering from you rogue =D

***9supernoob9*** · April 4th, 06:23 PM

u getti rid mof ure sweet tippy already jnjnfl

**AGD_kid** · April 4th, 06:37 PM

if you want a nice mag and don't mind the tac-one, i can get them for a very good price.

***jnjnfl*** · April 4th, 08:43 PM

No way 9supernoob9, keeping the tippy fer sure. Its almost too pretty to drag around in the woods now, lol. Just kinda like the idea of outshooting a Timmy or Impulse with a plain jane looking mech. Bwahahaha!!!!!! And AGD, nope the tacs are nice, but not for me though. Think soon as I get the dollars Ill get in touch with Rogue. Rogue, I know you cant price it without knowing what I want, but Im looking for an all black, super fast, super light gun. Can you give me a ballpark number? 200, 300? 700? Obviously it may go up or down, but just curious as to how much I need in my pocket before I start bugging you.

**Meekajahama** · April 4th, 08:57 PM

mags are fast but legally i doubt fast then a timmy sorry to say i love my mag wont use anything else for a while but its not up to speed legally with a timmy

***jnjnfl*** · April 4th, 09:42 PM

"legally" theres that word again. Where we play, woodsball that is, anything goes, as long as it doesnt go over 290 fps.

**AGD_kid** · April 4th, 10:07 PM

if they allow ramping and RT tippys then your mag is fine.

**Kdrx1** · April 5th, 10:15 PM

Quote:

Originally Posted by Emrys_250

Be sure to look at the paradigm. They are hot! Only $450 for one with a ult.

For the love of god, look at pardigram! http://www.automags.org/forums/showthread.php?t=163345
I wish i would have known about it. Saved myself 50 bucks and i still have to get a Sleeper rail, which comes stock on pardigram

Edit: You can set up youre mag to bounce a little and it shoul;d be fine for recball play but i have mine with no bounce and so far i have hit 11 bps.... When i get a Halo i can hopefully get it up a few more bps.

***jnjnfl*** · April 5th, 10:30 PM

"if they allow ramping and RT tippys then your mag is fine." lol, They , is me and my brother in law. Its our field. Til he sells his house

And I will check out the paradigms, also.

**AGD_kid** · April 6th, 11:49 AM

1) Mags Are Fast With or without Rapid Fire, Ult, Or Together.

2) Alpha Got 17 Bps By Bounce With The Ult, Which Is Illegal If A Heaf Ref Says It Is. Raising Input Pressure For Rapid Fire Is Legal, Rapid Fire Is Illegal If A Head Ref Says It Is.

3) This Is Basic Tourney/rec Rules, But In A Scenario Game 99% Of The Time, Anything Within A Safe Speed Being Used By A Player That Knows What They Are Doing Is Legal.