Eyes can be done just as easily as any other gun, providing you have an aluminum body and not the stainless steel twist lock variety.
Also, it would probably require the use of the TAG E-mag Predator board. The Stock board supports the use of the AGD ACE, but I do not know if the software would allow you to run break beams, since it would require different logic to work.
With an un-assisted trigger, the lvl 10 is really all you need. Even ripping on my Xmag, I rarely use the ACE with my Warp feed and have hit (Although only on occation) 18bps over the PACT. (and my fingers still ache)
If you have an emag and decide to upgrade to a Predator board, im sure that the eyes would be recomended due to the higher rates of fire you can get with it. They are a MUST on my Angel with the predator morlock in it.
I also know that TAG and possible Coolhand from Logic can do the milling for the eyes, but not the actual wiring and install. Well, not that they cant do the wiring, thye just choose not to. Its actually not to bad once you have everything drilled and ready to go. 2 wires each eye, some solder, and some eat-shrink tubing.
eyes on a mag?
