Mmmk...i got 2 questions, i ripped this straight from airgun.com ''patented 68 Automag A.I.R. valve (works with compressed air or CO2)'' so does that mean i could use co2 w/ the proclassic or is it like worrgames sayin you can use co2 in the outkast?
The classic valve works fine with co2. About putting a spyderframe on, I know it's possable but I don't know how. I know you need to modify it though. Ask Auto maggot becuase I know he put a rocking frame on his mag.
Doesn't take much, but dont expect too much. Classic valves are designed to shoot around 6-10bps give or take (usually give). If you throw a rocking trigger frame and start bouncing, you're going to run into problems.
Also, I'm not even sure if it works with classic valves, since it takes so much effort to push the on/off pin.
Basicly all you do is drill holes on teh spyder frame so it fots on teh mag rail, and modify either the sear or the pancake solenoid so it trips the mag sear.
Sounds to me like you want performance, but your either really poor or really cheap. Performance does not come cheap... Unfortunetly, you get what you pay for in paintball.
...That'd be really poor. I'd use a T-boarded esp frame w/ no trigger spring but a magno trigger to make up for it, not a bouncy rocker, but that = aparently to fast for the valve.
Sooo...proly won't be doing that any time soon since i'd have to get a new valve and if i did that i could just get the r/t valve which would make it better than a spyder frame anyway wouldn't it?
__________________
jumpinthefire422: your called "gifted" im called a recovering drug addict.
1.frames 2. co2
