I recently traded my mag with skateandpaint on this forum, and I feel bad because he says that the recharge rate its horrible (shoots down unless you wait 5 seconds between shots) , and it wasn't doing this before I shipped it out. I told him he probably has an LP output nitro tank (he can't tell if its HP or LP, and btw its an ACI bulldog 68/3000 if that helps) , or he needs to clean his nitro tank regulator, because his tank is 3 years old.
Anyway, the real question is, what else could cause a mags recharge to be that horribly slow?
Bolt stick? Otherwise I would think that the on/off pin is sticky. Lastly, if it is an adjustable output tank, turn it up to see if it is an input pressure problem or if you have a different tank, try that to see if it is the air supply or the marker.
heeey! i really appreciate all ur doin to help. well heres the story...
i bought a uni mount (its a WGP one)..and i thought that maybe it was somethin with the on/off. so i put the stock asa on and guess what! it works!!!!! yaaaaaay!!!!! so im gonna call doro and c if i can get another one.
right now its kinda leakin to where i have to put pressure on the trigger, but all i have to do is tune my lvl 10. thanks guys!
Thats because you didnt screw in your unimount enough. The threads on these things are so small, that the torque required to turn them on is almost impossible to achieve with your bare fingers, moreso when the unimount knob is so sharp.
Buy a CP.
Or, you can do what I do, just screw in the on/off with a wrench, and keep the tank attached to your gun.
Thats because you didnt screw in your unimount enough. The threads on these things are so small, that the torque required to turn them on is almost impossible to achieve with your bare fingers, moreso when the unimount knob is so sharp.
Buy a CP.
Or, you can do what I do, just screw in the on/off with a wrench, and keep the tank attached to your gun.
dude, i love you guys, now i can use my mount! cuz i love how the chrome/black looks. ill get some pics up in a bit. thanks guys