Thread Tools

**the_real_kaz** · June 10th, 12:34 AM

I looked at your Q & A thread but found it confusing at best I decided to just ask.

What type of grip frame can go on an RT Pro? I ask becouse in the pic thread I seen some with what appear to be Angel grip frames.... would I be able to just screw one of those grip frames in or will it not work or will I have to do major moding for it to work?? Thanks.

(P.S. I don't own an automag, but i'm starting to do a lot more tournaments now and I might find my self inheriting a HPA tank so I may be going much more higher end then my tippmann, but I still want to quality close to if not better then Tippmanns, thats why i'm looking at mags.)

Alpha · June 10th, 03:22 PM

Hmm I could've sworn I posted here.

1. They dont make any e-frames anymore. Keep this in mind. Buying one will almost definetly mean buying one used.

2. The Angel frame you saw is an RPG Chimera frame. It is mechanical. It just takes angel grips.

3. Go to www.Automags.org and look in the Buy/sell/trade forums for either E-mag lowers (which just bolt onto your gun), or a hyperframe, which is an aftermarket electronic frame.

Any automag trigger frame will fit on your RT PRo.. At least that I can think of.

I have a Chimera frame for sale (with black angel grips), and the splinter trigger for it. Its already milled and threaded for parts to make it a pneumatic trigger frame... Basicly its as light as an electro, but uses no batteries... Does take a bit of technical knowledge).

**the_real_kaz** · June 10th, 09:40 PM

Ok, so would I just be better off staying mech? I've seen those mechs, wow they are fast. I was just wondering for ramping modes.

But, thanks.

Alpha · June 11th, 12:16 PM

Stay mech becuase you can always upgrade later if you want. But it sounds to me liek mech will work fine for ya

**JimmyMcCracken** · June 12th, 02:57 PM

http://www.pbnation.com/showthread.php?t=1296871

Check out section three, it has a lot of different electro-mag options

**the_real_kaz** · June 13th, 10:30 PM

thanks that was very helpful.

***BigEvil*** · June 25th, 08:59 PM

Or you can just build your own like I did

http://www.bigevilonline.com/modules...41c9352a75b2ef

http://www.jayloo.com/videos/show_vid/2519.html
http://www.jayloo.com/videos/show_vid/2518.html

HEHEHE

**counterstrike53** · June 29th, 09:22 PM

^ best way to go about making a mag electro.

***BigEvil*** · July 6th, 06:39 PM

Quote:

Originally Posted by counterstrike53

^ best way to go about making a mag electro.

I has been working better than I ever hoped it would. It doesn't look or feel ghetto at all. It also feels much different than any other emag I have shot. (THe only ones I havent being Devil Mags)

If I ever get access to a mll I would start offering a build service for them. However, I would never take money from someone to make something that is hacked up with a dremel.

**txaggie08** · July 11th, 10:52 PM

Quote:

Originally Posted by counterstrike53

^ best way to go about making a mag electro.

it is the best way for DIY'ing it.

That one is very nice BTW

One good thing about that gun as well,and that style period, you could, if necessary, put a classic valve on it and run CO2 with nothing but one screw and a macro fitting or QD fitting. I know generaly that doesnt make a difference, but if you got out playing with say little cousin/brother/nephew etc., away from a field, you could keep it around were you would be able to get a tank filled

. or if you were doing some team practice, you would be able to get tanks filled more easily if no scuba tank was availiable. Its just an awsome setup, and i wish someone would be willing to make the pre-milled, but with no guts so they were a hiar cheaper to acquire(just a blank frame).

You wouldnt be interested in helping put a switch in a frame sometime eh? I butchered(and i mean butchered) an RPG frame trying to(talk about cussing a blue streak......i missed the window by 6 inches and had to float and tape a hole in my wall not long ago because of it....i still havent admitted to that on AO)

**counterstrike53** · July 12th, 12:15 PM

Then after putting on the spyder eframe, you could put a tboard in there and get some ramping.

More than likely, you'll be the only one within a radius of a few thousand miles that has a ramping automag.

**txaggie08** · July 12th, 06:59 PM

ramping is nto that hard to get wiht any emag. Most of the coustom one use pred boards, wich ramp and have eyes. There are also pred board coming out for the emag.

***BigEvil*** · July 15th, 09:26 PM

Quote:

Originally Posted by txaggie08

You wouldnt be interested in helping put a switch in a frame sometime eh? I butchered(and i mean butchered) an RPG frame trying to(talk about cussing a blue streak......i missed the window by 6 inches and had to float and tape a hole in my wall not long ago because of it....i still havent admitted to that on AO)

How the heck did you screw it up? Let me see a pic, maybe I can help.

**txaggie08** · July 18th, 02:08 AM

its missing a piece of the frame now.....its beyond repair for a mag trust me. Im using it on something else that doesnt require a noid be mounted(keep an eye on the BE forum for that project in the next few months.)

**txaggie08** · August 4th, 02:20 AM

if anyone cares, there is an emag on ebay at 200 for the bid right now.....if you want the lowers you could resell the rest of it...

***BigEvil*** · August 4th, 12:42 PM

Quote:

Originally Posted by txaggie08

if anyone cares, there is an emag on ebay at 200 for the bid right now.....if you want the lowers you could resell the rest of it...

Got a link I cant find one for $200.

**txaggie08** · August 4th, 06:17 PM

its gone. It looks like the listing has been removed. It was the number two item when you searched e-mag last night, but now its not there.

theres a set of lowers and a rail up, but the starting bid is at 395.......he can kiss my backside on that. There were some on AO for a little about 250 this past week...

**txaggie08** · September 20th, 12:35 AM

lowers with 4 days left up for 100$. search emag on ebay..