Thread Tools

JH · April 25th, 08:20 AM

Quote:

Originally Posted by p8ntbal4me

Okay Guys,.. you wanted to see it,.. you got it!

I spent the day with family ripping down some parts of the house which left tonight as the night we would build an EP Kit for your viewing pleasure.

Jay8541 sent me a Storm Walk to test the kit out in, and we are going to test it in EVERY combination possible.

**It pretty late and I have to be up early,.. so there are going to be a few videos uploaded later on. But these few should get your started. Check back after the 25th of April as I should have some new footage.**

First up was an intro video where we used the following setup:

Classic R/T twist lock body cut to take a standard valve from AGD
R/T on-off
No ULT
DYE 10" SS barrel
Some type of rail Jay sent me (looks like an E-Mag rail thats been ULE'ed)
E-Mag Sear w/o trigger pin
25g Micro Switch Trigger
Proto-type ram
Proto-type noid
Proto-type board
9volt battery
Externally mounted KAPP LPR
Preset 800psi HPA bottle
Storm Walk Frame
,..... and some electrical tape to hold it in! (Pannels are almost done!)

First string of shots was as fast as that valve will go. Its older,.. but it seemed to fire okay.

The second string of shots was 15-20bps ramp. This is slower than what we set the Shocker at in the second video.

First EP Kit Video

----------------------------------------

Second video is of a speed comparison of a 2006 Smart Parts Shocker set on fast ramp 20bps with the stock board against the EP Kit with uncapped ROF.

EP Kit v.s. 2006 Shocker SFT

----------------------------------------

Third video is the speed against a custom R/T I built for my brother. Input was at 950psi.
When I jack the pressure above that, it gets out of control! This R/T has been clocked up to 30bps! We re-set the level 10 2 days ago and lowered the input pressure so the super bolt would work properly. Its about 20ish now.

The skips you hear in the shot strings are what happens with the level 10 installed after the input pressure for the valve drops below 600psi at high ROF. Just after that video string,.. the gun ran out of air.

Custom R/T v.s. EP Kit

------------------------------------------

I have some blooper videos of the that night when we were testing the camera and I was building the gun and installing the kit. I started about 6 EST and got the video working about 12 EST,... thats 6 hours to build a custom kit in a cutsom frame on a custom body and working on the first try. (pat myself on the back) :headbang:

I havent heard much from Clippard as of when part proto-types are due, but I am working on other replacements for them just in case.

As you can see in the video,.... the pieces Im using work alright.

At Tunaball, Scott (BigEvil) and Jay (Jay8541) will be running the kits to test the boards in game format. If you like what you see, talk to Jay about these frames!!!! I start in on my completely internal kit and I will post video as soon as they are done.

~ P8nt

This is not my stuff. I copied off of AO in case one of us does not frequent that site.

**bobide** · April 25th, 01:27 PM

wait, so what exactly have they done?

JH · April 25th, 06:53 PM

This is basically a drop in electro-pneumatic kit for all mags as long as it can fit in the frame. This guy used the new Stormwalk frame.

Translation: It makes a mag shoot helluh fast.

Edit: Here is the original thread on AO.
Automags.Org Online Forums - Electro-Pneumatic Kit VIDEO!!!!

**bobide** · April 25th, 07:45 PM

i thought as much but i wasn't seeing any description as to how he'd accomplished it.

**txaggie08** · April 26th, 05:48 PM

he and Big-e are working on this i beleive. He's had a ram built that will bolt in on stock grip screws, is usning a mac noid and a morlock board as well. If he's using the noid im using in my conversion itll be able to run on classic valves to....

whats bad is it will support BB eyes and will not be dependant on having 900+ in the vlave to fire that fast....

JH · April 26th, 05:56 PM

Quote:

Originally Posted by txaggie08

he and Big-e are working on this i beleive. He's had a ram built that will bolt in on stock grip screws, is usning a mac noid and a morlock board as well. If he's using the noid im using in my conversion itll be able to run on classic valves to....

whats bad is it will support BB eyes and will not be dependant on having 900+ in the vlave to fire that fast....

Thanks tx.

Oh by the way, by bad you mean awesome right?

**kenny_1491** · April 26th, 06:43 PM

very sick find.

**txaggie08** · April 26th, 08:57 PM

yeah i meant it in an ironic sense

.

JH · April 26th, 09:01 PM

***BigEvil*** · August 21st, 11:19 AM

I havent really been around here in a while so let me tell you what P8ntbal4me(Jai) was working on.

It was basically a complete electro pneumatic kit for mags. "Drop-in" being a relative term, since you would still have to modify the frame to fit the trigger switch and a few other components as far as I could tell.

He came up with a really great compact ram component from somewhere, that has a built in qev and fits width-ways into an agd spec frame. I believe that some modification was required, but not alot.

Last I heard he was having solenoid issues and hadnt had a chance to work on the project for a while. So I am not sure where he stands at the moment.

JH · August 21st, 10:46 PM

Thanks for the update. BTW I like your forum.

***BigEvil*** · August 23rd, 11:25 AM

Quote:

Originally Posted by JH

Thanks for the update. BTW I like your forum.

Thanks

I myself have had my time completely dominated by major house renovations. So my site has kinda suffered. I have had a new project in the back of my mind for sometime, but I dont know when or if I will ever get around to it.

Thread Tools

View more Paintball photos