xanthusnoir

I have been hunting for any diagrams on what to/not to open up on my RT. I have a kit and on initial inspection the marker is bone dry from lack of use.

Any advice, links, and pointers would be apreciated.

__________________
www.*******.com/xanthusnoir
Smart Parts Ion XE (Red)/ Empire Reloader-b / PMI-Pure-Energy 68 cu
Automag RT / Viewloader Revolution

Crawdaddy

You can open up anything on an Automag they are designed to be 100% user serviceable. Everything you need to know is posted over on Automags.org if you own a mag you should already have AO book marked.

xanthusnoir

Thanks, I have not had it open in forever so I am forgetting all the parts I need to mess with and need to avoid. I hope I have no faults too deep in the mechanism.

I have replaced every o-ring I have been able to access but I have not opened the whole thing. I am likely going to need to put it in the hands of someone with more skills than I.

__________________
www.*******.com/xanthusnoir
Smart Parts Ion XE (Red)/ Empire Reloader-b / PMI-Pure-Energy 68 cu
Automag RT / Viewloader Revolution

xanthusnoir

She is all together again and shooting like a dream.

Now to find someone to duracoat her for me.

__________________
www.*******.com/xanthusnoir
Smart Parts Ion XE (Red)/ Empire Reloader-b / PMI-Pure-Energy 68 cu
Automag RT / Viewloader Revolution

xanthusnoir

__________________
www.*******.com/xanthusnoir
Smart Parts Ion XE (Red)/ Empire Reloader-b / PMI-Pure-Energy 68 cu
Automag RT / Viewloader Revolution

jgilk1

actually if you run some oil through the asa it will shoot it's a mag

__________________

xanthusnoir

LOL, it was a bone dry mag with o-rings that had the texture of brittle plastic.

Now she is working fine, but we had some laughs on the condition of the rings as we replaced them.

__________________
www.*******.com/xanthusnoir
Smart Parts Ion XE (Red)/ Empire Reloader-b / PMI-Pure-Energy 68 cu
Automag RT / Viewloader Revolution