Timber_Ghost

So ive got an ANS 68/4500 w a 800 psi output but i want to put a higher output tank on it to make the trigger a bit more reactive. Any suggestions? Im also looking at getting a ninja tank regulator because you can adjust the output using shims. If anyone knows how much pressure id be able to get out of this let me know. I dont think i want an air system that stays on the gun. thanks for any input.

__________________
Turning and turning in the widening gyre,
The falcon cannot hear the falconer;
Things fall apart; The centre cannot hold;
Mere anarchy is loosed upon the world...

-W.B. Yeats

Timber_Ghost

Well, ive effectively got my stuff tuned to how i want it. I put in one more shim than I needed so that the gun started leaking. then I filed the shims down in small incriments until the leaking stopped. my spring im using is the red one which was too stiff, so i clipped it down until it was working how i wanted. My gun is shooting beautifully now. still thinkin about an adjustable tank tho.

__________________
Turning and turning in the widening gyre,
The falcon cannot hear the falconer;
Things fall apart; The centre cannot hold;
Mere anarchy is loosed upon the world...

-W.B. Yeats

BigEvil

Use a shorter on/off pin in the gun. You dont need to run more than 850 into the gun if you have the pin right.

__________________

BigEvilOnline.com - Because EVIL has no boundaries

PBF Feedback AO Feedback Ebay Feedback

Timber_Ghost

Okay. How much shorter should I go?

__________________
Turning and turning in the widening gyre,
The falcon cannot hear the falconer;
Things fall apart; The centre cannot hold;
Mere anarchy is loosed upon the world...

-W.B. Yeats