Thread Tools

**flaminhoboballr** · July 21st, 02:50 PM

hey guys i was wondering what the best mag was i would lik e for it to run on co2 but if i have to use nitro for performance then so be it.....also if you could prices and where to get them cheapest

themainevent · July 21st, 02:57 PM

i think you can use any non lvl 10/x valve autmags with co2, not sure tho, if you want a good mag, you will need compressed air. Best place to buy them is really www.airgun.com direct from them. As far as mech goes, get a rt pro or whatever, get ule body, intelliframe, and lvl 10/x-valve, and you should have a good mech mag, and when the deadly hairwind comes out, and if you slap one of those on, you will have an awsome mother of all mechs

**IMPULSEMAN101** · July 21st, 03:19 PM

If you Run c02 Just make sure you Have a Verical asa...

**Zedaine** · July 21st, 04:21 PM

Only classic valves can run c02, a retro or x valve cannot.

Lord Headley · July 21st, 05:32 PM

Zedaine is correct. All mags can run it besides retro/x-valve. Please note that you CAN use it with a level 10. This is a myth that you can't use a level 10 and CO2

Oh, if you use CO2, you must run the tank vertically!!!! Any liquid that gets in your valve will cause it to go communist on you.

- Brian

sslecyk03 · July 21st, 05:52 PM

invest in a cheap nitro tank. You wont regret it

**AGD_kid** · July 28th, 12:07 PM

you guys forget, the best agd mag that runs on co2 is the sydarm

**Destructo6** · July 28th, 02:56 PM

Quote:

Oh, if you use CO2, you must run the tank vertically!!!!

You don't have to run it vertically. I run my CO2 tank horizontally, with an anti-siphon tube, and an expansion chamber on the old Classic valve (Lvl 10 inside). You're right that extensive measures should be used to keep liquid CO2 out of the valve.

Thread Tools

View more Paintball photos