Thread Tools

**pbpro115** · November 26th, 12:05 PM

is the feed interchangable....if not does it adjust to fit the hopper

also, whith the ULE trigger pull kit installed...How many bps can the average player achive (rt custom)

**Badinflewinse** · November 26th, 01:27 PM

The feedneck is interchangeable. I forget which type of loctite they use. I heard boiling helps to get it off easier. The stock feedneck doesn't tighten around the hopper.

For the ult it depends from person to person. Couldn't tell you the average either sorry. I've seen videos of a mag doing 23 but it wasn't legal.

Edit:http://www.zakvetter.com/Pages/Paint...rner_Main.html Look at the very bottom.
Also just searched and found out they use red loctite on the feedneck.

**ShepardD** · November 26th, 01:46 PM

OK, the feedneck uses Angel Threads, so any any locking feedneck should work

As for BPS with the ULT I usually get 12-13 BPS without having the tank put the gun into a runaway type condition, it is preset at 800psi, although I hear if you bump it up to 950 it will flat out hose paint.

as for loosening up the loctite, instead of boiling I used a heat gun, more localized, no water, worked fine.

**pbpro115** · November 26th, 01:51 PM

ok Healdy told me the ULT kills the reactivness (i am asuming he meant the it makes the X valve useless) so what is a fair bps with a Y frame/ Intelli without Ule

**Badinflewinse** · November 26th, 01:59 PM

Not sure how fast people can pull it. Never shot a mag without the ult.

**pbpro115** · November 26th, 02:19 PM

well what r u running ur ULT on, and what kind of valve does it have

**Badinflewinse** · November 26th, 02:40 PM

X valve and i assume you mean what pressure i run my mag at and it's high pressure.

**pbpro115** · November 26th, 02:48 PM

kno i meant what kind of mag is it...but heres a thought, Headly told me that theirs a way to get around the sacrifce of of reactivness, and since im getting a custom Rt pro, wouldnt they install the ULE kit and have it running as best as possible, like fixing the little problem with the Reactivness.

**Badinflewinse** · November 26th, 02:54 PM

I also shoot a rt pro. The reactivity is when you have a adujustable tank and purposly have it set up to do it. Hopefully someone else will be able to help you with this or correct me since i might be wrong.

**t33kyboy** · November 26th, 04:07 PM

AGD is not going to fix the 'little problem with reactivness," because theres no problem to fix. The only way to get some more RT back in the ULT is to crank up the input pressure.
I dont see whats the big deal is, I can shoot 12bps perfectly fine with a tuned ULT and a preset tank. If you want to shoot faster then you shouldnt of gotten a mech.

Alpha · November 26th, 04:25 PM

The ULT was to fix the autofire thing.. You could sweetspot the RT and just hold the trigger down adn hit 16bps easy. All you needed with 900-1000PSI of input and an rt marker.

**MrMacDude** · November 26th, 05:46 PM

The ULT kills reactivity, but add shims and you gain some back. The ult allows you to compromise between reactivity and trigger lightness. Its up to you how you balance it.

**MrMacDude** · November 26th, 05:49 PM

I can shoot around 8 bps on my tuned ULT mag. I think everyone else here is exaggerating.

Quote:

Originally Posted by Alpha

The ULT was to fix the autofire thing..

Thats not true. The only reason was to improve the lightness of the trigger. Mags only go into runaway if you WANT THEM TO.

**ShepardD** · November 26th, 06:09 PM

I routinely get 12 or 13 bps over the chrono, I have seen 14 a couple of times, but only a couple of times, I think it must have been more a fluke.

**t33kyboy** · November 26th, 06:09 PM

Yes, maybe you have slow fingers. 0?

**MrMacDude** · November 26th, 07:43 PM

8 is fast on a mech... i REALLY don't see how more is possible. My friends cant beat 9, on it.

Any chance you could do a movie or a sound clip of it?

PS I'm talking solely about mags here. Your info says you have a TES, but you seem to be talking about an RTP. Just making sure, we are both talking mags here, right?

**MrMacDude** · November 26th, 07:47 PM

Quote:

Originally Posted by t33kyboy

Yes, maybe you have slow fingers. 0?

You have an e-mag, right? I can hit 16 on a friends emag.I'm only talking about mech mags.

**t33kyboy** · November 26th, 07:55 PM

I had a mech mag also, 12 bps was easy on it.

**MrMacDude** · November 26th, 07:58 PM

I'm still skeptical. No one I know can shoot that fast on mine, and there is not a better mech mag on earth.

**t33kyboy** · November 26th, 08:01 PM

Mine is better.