barjohn

Hey i got a compressed air tank with a Guerilla air ambush Regulator. I tried to take the tank off my gun by twisting today and it started loosing off on a part other then the threaded part. like the regulator was unscrewing in half. Is this normal? do i need to tighten the screws on the side or somthing?i included a picture with a arrow pointing to the seam where it was unscrewing at.

__________________
Old school paintball. mini mag special .

a031363

wow, huge pic! Anyway, no, that is not normal. If any part of the regulator starts to unscrew, that is a very bad thing. Since the pic was taken against a dark background, it is difficult to tell at what the arrow is pointing. But, that part of the reg is usually the "bonnet" and there should be one or more set screws to keep it tightened onto the top of the reg. Screw it back onto the reg, then take the tank to your local shop with airsmith and have them look at it.

__________________
DP G3, Halo, Scepter Barrel Kit, 45/4500 Tank - Small, tight, and light.

PbNation Feedback
eBay Feedback