Thread Tools

**xxxfirexxx** · June 9th, 03:20 PM

I used my 20 ounce before, and it did something a lil odd. I think it was the o ring but I'm not sure. As soon as I screwed it in my gun, air started spewin out that hole. The only 2 things that I can think of is the o ring was messed up or my pin was depressed and got stuck. It didn't come out the rupture disc, it came out of the air release in the gun. Any help?
IT's an old tank, I didn't pay for it. Someone left it at my uncles house and he gave it to me cuz he knew I played.

Any suggestions on what to do?

**Aggression** · June 9th, 03:25 PM

Try replacing the O-ring, and the seal in your gun by where the tank goes in.

**xxxfirexxx** · June 9th, 03:28 PM

where would I get a new seal?

**bmxfreak927** · June 9th, 03:59 PM

well if its an old tank it may have dirt or something lodged in it. that would caused the valve not to seal properly.try replacing the o-ring.if that doesnt work take it to your proshop they can prolly replace the valve for a small price

**Apache** · June 9th, 04:04 PM

what kinda gun is it? Is it coming out the Expansion chamber?

**xxxfirexxx** · June 9th, 04:13 PM

m3 fuel, i'm gonna get a tippy in a couple pay checks so i'll b set but it's comin out of where the tank screws in. THe bottom has a tiny hole for that reason.

**Apache** · June 9th, 04:22 PM

prolly just a old tank did u rehydrotest it?

**Huey69** · June 9th, 04:25 PM

its the o-ring just replace.

**AndrewF150** · June 10th, 03:05 PM

Well if it is coming out of the little whole on the valve of the tank it sounds like he busted the little rupter disk in it..the little thing that helps prevent tanks from being over filled?

If you get a new o ring and everything is clean in the threads and it is doing it still...you probally just ruptered that disk...??

**xxxfirexxx** · June 10th, 04:02 PM

no, cuz if it broke the disc it would come out that bolt hole

Thread Tools

View more Paintball photos