pbpro115

i bought a Jam-Products Anti-Chop bolt and imediately put it to the test. I took a single, PMI/RPS Big Ball paintball and held it partially in the chamber of a spyder e99. I then pulled the trigger and noticed that the the bolt was pinching the ball, which is what it is designed to do. I looked at the ball, and noticed it had been deformed by the bolt (hey, much better then chopping). Well i put the Ball in partially in the chamber again and noticed the same effect. I did this about 5 more times without the ball breaking. On the 7th or 8th try the ball was punctured (a very small hole, there was a small dab left on the bolt). I was very pleased with the outcome of this bolt. This product is a must for anybody with a spyder or spyder clone, as u kno, spyders are imfamous for chopping paint. I give this product an a- because it is very good upgrade, but still, it deforms the ball, reducing accuracy. *NOTE the bolt itself does not cause a decrease in accuracy, the result of the bolt pinching paint causes a decrease in accuracy by deforming the shape of the ball.

pbpro115

i just did the tes again, but this time i used Daxxus Dusk. I noticed some peculiar effects due to the bolt pinching the ball. So i had to use several iffernt to see if they would provide me with the same outcome. It seems that half of the balls that were pinched were not deforemed. AND nearly all the balls were pinched, then pushed threw the barrel all in one motion. I kid u not i jsut performed this test with several differnt balls.

pbpro115

i posted this article about thirty minutes ago, but in the wrong place, thats why theres only a time differnce of 2 mins. Cause i copied, delted, then pasted over here.