Thread Tools

**chester styles** · March 5th, 08:19 PM

Alright so here is a picture of my cocker, can someone please tell me what the inline regulator is on here so that i can sweet spot my marker. Can someone specifically tell me how/where to adjust it. Thanks for helping a newbie.

**bobide** · March 5th, 08:37 PM

the asa is the reg i beleive. should be a screw on it somewhere. I don't know which will u should turn it but 1 way will raise pressure, the opposite lower.

**dirtrider** · March 5th, 08:57 PM

your reg is the thing that you hold onto with w/e hand your not shooting with. adjust the reg with a screw or some regs have knobs. Sweetspotting your marker involves finding the pressure that worsk best for your setup. Here's the steps.
1. Buy nice paint. Poor quality paint will waste your time.
2. Adjust your IVG to about middle.
3. Turn your reg all the way down.
4. Slowly turn up your reg, shoot like 3 times every quarter turn.
5. Keep turning the reg up until the velocity is at its peak, and if you turn the reg anymore it will lower the velocity or do nothing.
6. You have found the sweetspot. Adjust your IVG to your field limits.

**bobide** · March 5th, 09:17 PM

nope, ur wrong, its the ASA. The ASA can also be a reg. That's how dragun/odessy made the o3m.

**chester styles** · March 5th, 09:18 PM

i think bobide is right because i cannot find any freaking screw on my inline regulator. do u reccomend buying a new one?

**lbreevesii** · March 5th, 09:18 PM

on that gun it should have a small hex screw in the side for adjusting the reg. if not, you have to screw off the bottom of the reg. if you then look up side it there is a slotted screw thing that you turn, right goes up, left lowers.

**dirtrider** · March 6th, 09:23 AM

wait, so on the odesssy cockers the ASA is the reg? Like a horizontal one?

**bobide** · March 6th, 12:24 PM

yes. it is.

**sumsimpleracer** · March 6th, 02:25 PM

Quote:

Originally Posted by dirtrider

wait, so on the odesssy cockers the ASA is the reg? Like a horizontal one?

theirs 3 types of Reg's
1. LPR (low pressure reg)
2. 2nd stage reg (inline reg)
3. 1st stage reg (under ASA)

the 1st stage is really just optional on cockers and i really dont know th real name....the 2nd stage is just a name i like to use rather than saying "inline reg" and the LPR is used to adjust bolt pressure

But the O3m it looks like its jsut a regular on/off valve with a gauge....I think the inline reg thats on it right now, isn't adjustable, kinda like the ones on 03 vf's

**chester styles** · March 6th, 05:08 PM

Do you think to upgrade the reg. would be a good idea. If so, which one is good out there.

**bobide** · March 6th, 05:13 PM

cp reg.

**sumsimpleracer** · March 6th, 09:03 PM

cp, black magic/ergo, shocktech

Thread Tools

View more Paintball photos