Thread Tools

**JaKeZ** · June 27th, 05:39 PM

first off hey every one long time no c

, my problem is the holes in the bottom of my eblade frame for the drop are striped. i can do it myself i have acces to the tap and whatnot but i need the sizes for the bits, any help would be greatly apreciated.

**JaKeZ** · June 27th, 06:09 PM

any 1?

**CoolHipJim56** · June 27th, 06:11 PM

I don't know what it is. But if you have any scrap metal laying around, drill a few practice holes and see which hole the bottomline screw goes into with the best fit. Thats what I would do in your shoes.

**paintthecatBLUE** · June 28th, 08:31 AM

wood would probablly work too. but why do you need a drill bit? if the hole is already there then you do not need to drill another one, you just need to tap the threads in it.

edit: oh i think you meant the size for the tap.

. but there are four holes in the bottom of the eblade, if you didnt strip all 4 of them you can go through your tap set and try screwing them into the frame. if the threads are not stripped it should go in by hand without the use of a tool, but if there is sand or metal filings in the threads you may feel some resistance. if it wont go in by hand though, just stop because you probablly have the wrong size.

**JaKeZ** · June 29th, 05:39 PM

so i fixed it and here it is with the air on it. i have a halo but the neck os tearing so im not sure what to do with that, and im getting the cp1 piece casue i sold my old 1

**JaKeZ** · June 30th, 08:04 AM

the other side. what do u guys think?

**Huchacool3** · June 30th, 08:49 AM

nice gun, get an mq

**JaKeZ** · June 30th, 09:06 AM

thanks, whats a mq?

**jaggy13** · June 30th, 09:34 AM

MQ is a leppard print gun case with fuzzy warm furr inside to keep your gun in.
Its the AGG thing to do.

**JaKeZ** · June 30th, 10:19 AM

um if ur serius who makes it, and not to sound stupid whats AGG?

**CoolHipJim56** · June 30th, 01:34 PM

Jaggy is being sarcastic I think?

Any how, the MQ valve takes the place of the hammer and valve, and turns your cocker into a complete electro pneumatic marker. It can plug directly into your E1 or E2.

I sent you a PM to a link of information to it.

And agg means cool in the stupid HK Army crap language.

**JaKeZ** · June 30th, 02:11 PM

o ok. thats an awsome thing what u pmd me but the companys site who makes it wont come up. but ill keep an eye out for one, do u know thr price for one of em?

**CoolHipJim56** · June 30th, 02:12 PM

I think I read somewhere the MSRP is around $119.99

**JaKeZ** · June 30th, 02:15 PM

wow thats a bit pricey but it looks worth it, so it will replace all my nexus internals?

**paintthecatBLUE** · June 30th, 02:17 PM

it replaces the entire lower tube...

but you could probablly sell your nexus lower tube internals to offset the cost of the MQ-valve

**sumsimpleracer** · June 30th, 02:27 PM

hmm i dont know if anyone else had this problem but my friends cocker is very inefficient ever since he installed the MQ i don't have details all i know is that its not very efficient any more.

**bobide** · June 30th, 02:35 PM

gj w/ fixing the holes. I'm impressed.

**JaKeZ** · June 30th, 04:01 PM

thanks. o and ill keep researchng that piece

**paintthecatBLUE** · June 30th, 04:09 PM

i dont see how the mq-valve could be less effecient. since the dwell is controlled electronically rather than by your IVG, and since the ram doesnt have to push against a spring anymore, i dont see where his air is going... lol.

did he re-sweetspot his reg after installing? the mq probablly has a different operating pressure than what he was using before.

**tippmannbeast** · June 30th, 04:44 PM

when you install anything that has any effect on your lower tube you'll have to re-sweet spot

nice cocker