Thread Tools

**toXic** · September 12th, 04:03 PM

Ok. My cocker needs some tlc, i just put it together, and it literally leaks out of every hole lol..... Frontblock leaks(used thread tape, lube) and leaks out of the barrell, electronic 3 way leaks..... you get the picture. So i was wondering if you guys could recommend a good company to send this to, and if your reliable/an honest person maybe you could fix it for me.
k thx

**1337** · September 12th, 04:05 PM

Talk to CoolHipJim.

**jaggy13** · September 12th, 04:47 PM

I do quite a bit of tech work also, but I am slammed for the next few weeks. If its not urgent, shoot me a PM. I don't have alot of feedback for tech work, but I have worked on a mods gun, you can talk to onesikpup about my services.

**paintthecatBLUE** · September 12th, 06:31 PM

i'd do it, assuming you trust me enough to do it... i have a spare o-ring kit

i'll pay for anything in the (rare) chance i break anything moreso than its already broken, and you dont have to pay me anything except shipping. unless you want to donate a few bucks

i own a cocker, know them inside and out, have all the tools, and ive fixed other peoples cockers before. get on aim or send a pm, im never too busy to not fix something...

***DarkTamer*** · September 12th, 08:07 PM

I'll do it for free if you're willing to trust me. I live in MA, I like working on guns and I have a good amount of experience with cockers. I can't garuntee that I will be able to completely fix it though, it may need new parts that I don't have.

**toXic** · September 12th, 09:27 PM

thanks guys. For those of you that say you will do it for free, i will give you a little donation lol.

**jaggy13** · September 13th, 12:24 PM

I won't do it for free...

***DarkTamer*** · September 13th, 06:43 PM

Quote:

Originally Posted by jaggy13

I won't do it for free...

But he will probably be your best bet. If you don't want to pay money, then I would suggest me next

**paintthecatBLUE** · September 13th, 07:04 PM

^ but you dont have parts

i sense a large, bloody battle over who will get to fix his gun... lol

***DarkTamer*** · September 13th, 07:17 PM

Quote:

Originally Posted by paintthecatBLUE

^ but you dont have parts

i sense a large, bloody battle over who will get to fix his gun... lol

I do to. Let the battle begin:

Neither do you, you just have spare o-rings which I have.

**paintthecatBLUE** · September 13th, 08:07 PM

Quote:

Originally Posted by drktamer

I can't garuntee that I will be able to completely fix it though,

i can completely fix it.

**sumsimpleracer** · September 13th, 09:19 PM

i would compete but i'm not always the most knowledgeable person i know a lot though just not as much as oh say jaggy

***DarkTamer*** · September 13th, 09:39 PM

Quote:

Originally Posted by paintthecatBLUE

i can completely fix it.

What I meant if it there is anything that can't be rebuilt, in which case no one can fix it. He would need to buy the new part.

**jaggy13** · September 14th, 01:50 AM

Quote:

Originally Posted by drktamer

What I meant if it there is anything that can't be rebuilt, in which case no one can fix it. He would need to buy the new part.

pshhh
don't buy parts... make them! I hear thats what real men do!

***DarkTamer*** · September 14th, 07:22 AM

Quote:

Originally Posted by jaggy13

pshhh
don't buy parts... make them! I hear thats what real men do!

Well, not everyone has magical skizzles with a dremel and hacksaw like you jaggy

Besides, he might want real factory parts instead of homemade, idk.

**jaggy13** · September 14th, 09:38 AM

btw, gonna try and make that back block this weekend. (2 weeks of class left then I will have a life again)

***DarkTamer*** · September 14th, 02:10 PM

Quote:

Originally Posted by jaggy13

btw, gonna try and make that back block this weekend. (2 weeks of class left then I will have a life again)

I thought you were gonna make a bolt, not back block?

Either way, thanks again!

**jaggy13** · September 14th, 05:52 PM

bolt? I have delrin too. I actually probly could. But I don't have a lathe yet. I guess I could hook up the 18v cordless drill and build a spindal with a set of bearings and hone it down with a bowie knife. (can it get more redneck than that?)
If I do that though, I am going to make a custom back block too. how bout a delrin snatch grip too? your gun is black in the back right?

***DarkTamer*** · September 14th, 07:11 PM

Dust black, yeah (link to pics are in sig)... go freaking crazy man

-edit- sry for spamming up your thread toxic... my free repair offer still stands!