xpocad

Can an autococker / future upgrade to eblade run off a low presssure N2 Tank??

sumsimpleracer

yes it can, but try it otu before you go and buy one to make sure yours can, because going LPA can mean starving your gun of air

__________________

vllad

The autococker needs 300psi to 350psi to run right. the out put from your tank needs to be about 150psi higher to make it work right.So as long as the HPA tank is around 500psi it sould be good for you. Hope this helps-VLLAd

kenny_1491

it should be ok (add on to Vlad) at the worst your gun will have shoot down at higher rates of fire.

__________________




Magenta for RB

jaggy13

if you have the option just get HP.

It can be tuned to use LP but recomendation is always for HP tank.

__________________
MY FEEDBACK


1 cheap ION and one not so cheap ION

Don't Get Scammed! Use My 3rd Party Service!

Frozen Paint

^ QFT

HP output is always better. you wont have to worry about 2 recharge rates and if your gun goes down in the midle of your day, you can put your tank of your alt gun no matter what it is.

__________________
Feedback: pbnation.com paintballforum.com

COCKER OWNER # 57 HECK YESH!


A recent study shows that 92% of all teenagers moved on to rap, put this in your sig. if you're one of the 8% who stayed with real music.

xpocad

If I were to get my autococker ebladed...would the LOW Pressure tank still work??

kenny_1491

it would, you would just not be able to get higher rates of fire for the chance of shoot down is alot greater.

__________________




Magenta for RB

xpocad

thanks guys!!!!